View Label | View MSDS
4LB Amine

CORNBELT® 4 LB AMINE

4 pounds of active ingredient per gallon herbicide for selective control of many broadleaf weeds in non-crop areas, grass pastures, rangelands, and certain crops. Also for control of trees by injection.

ACTIVE INGREDIENT:
Dimethylamine Salt of 2,4-Dichlorophenoxyacetic Acid: 46.3%
INERT INGREDIENTS: 53.7%
TOTAL: 100.0%

Cornbelt® 4LB. AMINE controls more than 50 broadleaf weeds including cocklebur, lambsquarter, annual morningglory, jimsonweed, bull thistle and many more.

Cornbelt® 4LB. AMINE contains an anti-foam agent to prevent annoying foam in the mix tank.

Cornbelt® 4LB. AMINE contains a premium sequestering agent that prevents a reaction in hard water which can result in a precipitate that can clog nozzles or create differences in effectiveness between the top and bottom of the tank.

Cornbelt® 4LB. AMINE mixes with water and is a clear color in solution when mixed.

Cornbelt® 4LB. AMINE has no significant volatility and is effective on weeds during moist conditions.

Cornbelt® 4LB. AMINE generally does not damage crops as it has a more gentle effect on crops than ester formulations.

Cornbelt® 4LB. AMINE can be stored at subfreezing temperatures. If freezing does occur the product should be warmed to at least 40 degrees Fahrenheit and mixed thoroughly before using. Following this procedure assures that weed control performance is not decreased by sub-freezing temperature exposures.

Cornbelt® 4LB. AMINE is a high quality formulation known for dependable performance.

View Label | View MSDS
4LB Lovol Ester

CORNBELT® 4 LB LOVOL ESTER

4 pounds of active ingredient per gallon herbicide for the control of many broadleaf weeds, herbaceous perennials and woody plants susceptible to 2,4-D.

ACTIVE INGREDIENT:
2,4-Dichlorophenoxyacetic Acid: 66.0%
2-Ethylhexyl Ester
INERT INGREDIENTS: 34.0%
TOTAL: 100.0%

Cornbelt® 4LB. LOVOL ESTER is a low volatile 2,4-D that contains a premium emulsifying agent which forms a stable emulsion. It is the ideal tank mix partner for burndown prior to planting in no-till and minimum tillage farming practices. The ester formulation of 2,4-D is generally more effective than amines on mature or large weeds or during dry conditions and gives a broader spectrum of control on the tougher broadleaf weeds.




View Label | View MSDS
6lb Lovol Ester

CORNBELT® 6 LB LOVOL ESTER

6 pounds of active ingredient per gallon herbicide for the control of many broadleaf weeds, herbaceous perennials and woody plants susceptible to 2,4-D in grass pastures, certain crops and non-crop areas.

ACTIVE INGREDIENT:
2,4-Dichlorophenoxyacetic Acid: 87.7%
2-Ethylhexyl Ester
INERT INGREDIENTS: 12.3%
TOTAL: 100.0%

Cornbelt® 6LB. Lovol Ester is a low volatile 2,4-D that is a highly concentrated ester which gives excellent weed control that is very cost effective.




View Label | View MSDS
Atrazine 4L

CORNBELT® ATRAZINE 4L

4 pound active ingredient per gallon herbicide for season-long weed control in corn, sorghum and certain other crops.

ACTIVE INGREDIENTS: 43.6%
Atrazine: 2-chloro-4-ethylamino-6-isopropylamino-s-triazine: 42.9%
Related compounds: 0.7%
INERT INGREDIENTS: 56.4%
TOTAL: 100.0%

Cornbelt® Atrazine 4L is formulated utilizing a state-of-the-art microhomogenized process which yields a top quality product with small particle size which is easy to pour and light in color. It is totally clay free enabling it to mix well and spray better with less plugged nozzles. Cornbelt® Atrazine 4L is formulated using only the highest quality technical atrazine available.

View Label | View MSDS
Atrazine 90DF

CORNBELT® Atrazine 90DF

Extruded water dispersible granular herbicide for season-long weed control in corn, sorghum and certain other crops.

ACTIVE INGREDIENTS: 90%
Atrazine: 2-chloro-4-ethylamino-6-isopropylamino-s-triazine: 88.5%
Related compounds: 1.5%
INERT INGREDIENTS: 10%
TOTAL: 100.0%

Cornbelt® Atrazine 90DF Extruded is formulated utilizing a state-of-theart extrusion process. This process yields a high quality low dust product in a uniform granule size with excellent dispersion.

Cornbelt® Atrazine 90DF Extruded disperses fast, mixes well and stays in suspension longer than other dry flowables. Cornbelt® ATRAZINE 90DF Extruded is formulated using only the highest quality technical atrazine available.




View Label | View MSDS
Base

CORNBELT® Base™

CORNBELT® BASE™ is a blend of alkaline buffered methylated seed oil, nonionic surfactant, ammoniated nitrogen, and compatibility aids.

INGREDIENTS:
Alkaline buffered methylated seed oil, nitrogen-based fertilizer solution, nonionic surfactant and antifoam agent: 100%

Cornbelt® BASE™ is a “basic blend adjuvant” that enhances the performance of many herbicides including sulfonylurea herbicides such as Accent®, Accent Gold® and UpBeet®, and imidazolinones such as Pursuit® and Raptor®, and sugarbeet “microrate applications”.

Basic Blend Adjuvants increase water pH which increases water solubility of certain herbicides and are referred to as blends because they contain very different components that have different functions within the composition of the adjuvant.

Cornbelt® BASE™ combines the surfactant advantages of nonionic surfactants, methylated seed oils, and fertilizer adjuvants, while raising the pH of the solution which enhances the solubility of many sulfonylurea andimidazolinone herbicides.

Example: Accent® is 3 times more soluble at a pH of 8.5 than at a pH of 7. UpBeet® is 100 times more soluble at a pH of 9 than at a pH of 5. Pursuit® is twice as soluble at a pH of 9 than at a pH of 7.




View Label | View MSDS
Compatibility Agent

CORNBELT® Compatibility Agent

PRINCIPAL FUNCTIONING AGENTS:
Alkyl Aryl Polyethoxy Ethanol Phosphate
And other Ethoxylated derivatives: 78%
Inert Ingredients: 22%
TOTAL: 100.0%

Cornbelt® COMPATIBILITY AGENT is a conditioning adjuvant designed to improve the compatibility of liquid fertilizers with pesticides, as well as combinations of different herbicides when applied in a single spray solution.

Cornbelt® COMPATIBILITY AGENT will provide a more uniform and stable liquid fertilizer/pesticide solution in the spray tank which will aid in more accurate and uniform applications with minimal agitation.

Liquid Nitrogen Fertilizers: Use 1 to 3 pints of Cornbelt® Compatibility Agent per 100 gallons of total liquid Nitrogen fertilizer/pesticide spray solution.

Liquid Mixed Fertilizers: Use 2 to 3 pints of Cornbelt® Compatibility Agent per 100 gallons of total liquid mixed fertilizer/pesticide spray solutions.

Herbicide Combinations: For spray solutions of combinations of two or more herbicides, use 1 to 3 pints of Cornbelt® Compatibility Agent per 100 gallons of spray mix.

Since formulations vary, all fertilizer/pesticide mixtures should be tested for compatibility prior to field mixing. The correct amount of Cornbelt® Compatibility Agent will depend on the type of fertilizer and pesticide being mixed in the spray tank. Do not use Cornbelt® Compatibility Agent with sulfonyl urea herbicides.




View Label | View MSDS
Crop Oil

CORNBELT® Crop Oil Concentrate

INGREDIENTS:
Paraffinic Petroleum Oil: 83%
Surfactant Blend/Emulsifier: 17%
TOTAL: 100.0%

Cornbelt® Crop Oil Concentrate is a superior blend of paraffinic base oil and non-ionic surfactant/emulsifier providing excellent leaf penetrating and wetting properties.

Cornbelt® Crop Oil Concentrate contains a paraffinic base oil which is over 90% unsulfonated, reducing the amount of residues that could damage sensitive plant tissues.

The surfactant/emulsifier used in this formulation has been laboratory and field proven to provide excellent emulsifying and spreading qualities. Defoamer has been added to Cornbelt® Crop Oil Concentrate’s formulation helping minimize the formation of foam when mixing. Foam slows the spray tank filling process and can lead to an uneven tank mixture.

Cornbelt® Crop Oil Concentrate penetrates the waxy layer of cuticle on the leaf surface increasing the opportunity for more herbicide to be taken up by the plant, thereby, enhancing herbicide activity.

Cornbelt® Crop Oil Concentrate reduces the surface tension of the spray solution providing more uniform droplet size and better spreading characteristics of the spray droplet on the leaf surface. Increased herbicide retention and drying time are two more added benefits of using Cornbelt® Crop Oil Concentrate.




View Label | View MSDS
Defoamer

CORNBELT® Defoamer

ACTIVE INGREDIENT:
Silicone Emulsion: 10%
INERT INGREDIENTS: 90%
TOTAL: 100.0%

Cornbelt® Defoamer is an effective way to prevent or eliminate foam from becoming a problem while mixing pesticides. Foam is usually a result of pesticides and concentrated surfactants being mixed together under agitation. Defoamers work by reducing the surface tension of bubbles, preventing them from forming or lasting. Some of the disadvantages of foam buildup are uneven tank mixtures (pesticide becomes tied up in the foam), spray tank overflow and slow tank filling.

Cornbelt® Defoamer should be added to the tank before pesticides or other adjuvants. In cases where foam has already developed, simply add Cornbelt® Defoamer in a zigzag pattern over the foam. Cornbelt® Defoamer will not react with any pesticide it is used with.




View Label | View MSDS
Dri-Gard

CORNBELT® Dri-Gard®

Ammonium sulfate based water conditioning agent with drift & deposition management Agents and defoamer

INGREDIENTS:
A Proprietary Blend of Ammonium Sulfate, Polyacrylamide and Polysaccharide Polymers and Antifoam Agent: 100.0%

Cornbelt® DRI-GARD® is a multifunctional drift & deposition management and water conditioning agent containing the TransGard® System technology.

Cornbelt® DRI-GARD® is a milled ammonium sulfate that contains a unique combination of polymers that provide drift management and improved deposition.

Cornbelt® DRI-GARD® is designed to be used with herbicides that call for the use of AMS and in applications where drift, deposition and foaming are issues.

Cornbelt® DRI-GARD® is formulated with a patented polymer system that improves spray penetration and performance.

Cornbelt® DRI-GARD® contains silicone antifoam to minimize the formation of foam in the spray tank.

USE RATE: Spray pressure below 30 psi or when using cone or raindrop nozzles: 9 pounds per 100 gallon of spray solution. 9 pounds of Cornbelt® DRI-GARD® per 100 gallon delivers 8.5 pounds of ammonium sulfate. Spray pressure greater than 30 psi or when using flat fan or flood nozzles: 9 to 12 pounds per 100 gallon of spray solution.




View Label | View MSDS
Foam Marker

CORNBELT® Foam Marker

PRINCIPAL FUNCTIONING AGENTS:
Proprietary blend of active foam agents: 45.9%
INERT INGREDIENTS: 54.1%
TOTAL: 100.0%

Cornbelt® FOAM MARKER produces rich foam in a wide range of hard water conditions because it contains water softeners and conditioners. Foam quality is a result of the density and wall thickness of the foam bubbles. A foam marker is measured by how much money it can save in increased efficiency. The cost of pesticides, labor, fuel, insurance and misapplication are why it is important that the foam marker selected remains highly visible under a wide range of environmental conditions. It provides highly visible foam that lasts from 30 minutes up to several hours depending on environmental conditions.

USE RATE: 1 gallon per 80 gallons of water




View Label | View MSDS
Foam Marker Dye

CORNBELT® Foam Marker Dye-Red

Cornbelt® FOAM MARKER DYE (available in Blue or Red) is a highly concentrated colorant to add to the foam solution tank to produce a colored and more highly visible foam. Applicators of fertilizers and pesticides will discover the ease of application when guided by a trail of brilliantly colored foam marks. Adverse field conditions such as sunbleached stubble, heavy crop residue, snow, sand, or alkaline areas will restrict the visibility of normal foam marks. However, by adding Cornbelt® FOAM MARKER DYE to the foam solution tank, the applicator will eliminate this costly and frustrating situation.

Add one ounce of Cornbelt® FOAM MARKER DYE per 10 gallons of foam concentrate solution.




View Label | View MSDS
Gardian

CORNBELT® Gardian®

Drift & deposition management and water conditioning agent

INGREDIENTS:
Ammonium Sulfate: 20%
Acrylamide Sodium Acrylate Linear copolymer: 1%
Glycerol/Acid (citrophosphate) & siloxane: 14%
INERT INGREDIENTS: 65%
TOTAL: 100.0%

Cornbelt® GARDIAN® is a multifunctional drift and deposition management concentrate and water conditioning agent containing the TransGard® System technology. Cornbelt® Gardian® is designed for use on both transgenic and conventional crop varieties. Cornbelt® Gardian® is formulated with a unique combination of patented, high molecular weight viscosity modifiers and antievaporants.

DRIFT & DEPOSITION MANAGEMENT:

Cornbelt® Gardian® aids in drift & deposition management in three ways:

WATER CONDITIONING AGENT:

Cornbelt® Gardian® conditions the water in the spray mix in three ways:

ADDITIONAL FEATURES & BENEFITS:

Cornbelt® Gardian® contains a silicone additive to minimize the formation of foam in the spray tank.

Cornbelt® Gardian® is a pre-swelled high molecular weight polymer. Pre-swelling prevents the caking or gelling effect often found in traditional drift management products.

USE RATE:

1-3 quart per 100 gallon of spray solution.


View Label | View MSDS
Gardian Plus

CORNBELT® Gardian Plus®

Drift & deposition management and water conditioning agent plus ammonium sulfate

INGREDIENTS:
Ammonium Sulfate: 34%
Glycerol/Acid (citrophosphate)- Acrylamide Sodium
Acrylate Linear Copolymer complex & siloxane: 3%
INERT INGREDIENTS: 63%
TOTAL: 100.0%

Cornbelt® GARDIAN PLUS® contains the same features and benefits of Cornbelt® GARDIAN®, plus the addition of liquid ammonium sulfate:

USE RATE:

If 8.5 lbs of AMS is desired: Use 2.5 gal per 100 gal of spray solution. If 17 lbs of AMS is desired: Use 5 gal per 100 gal of spray solution.

CORNBELT® GARDIAN PLUS® & GLYPHOSATE:

Cornbelt® Gardian Plus® is the perfect fit with Glyphosate products. In addition to ammonium sulfate, a drift, deposition and water conditioning agent is suggested when using the various Glyphosate products. Cornbelt® GARDIAN PLUS® provides the convenience of a liquid with everything you need in one container when using Glyphosate products.




View Label | View MSDS
Hand Cleaner

CORNBELT® Hand Cleaner

Cornbelt® Hand Cleaner is specifically formulated to remove pesticide stains, oil, grease, paint, seed dyes and other hard to remove contaminants from skin. Its potent cleaning action even removes such herbicide stains as Cornbelt® Trifluralin, Treflan, Prowl and Pendimax (DNA yellow herbicide stains). While removing tough stains, Cornbelt® Hand Cleaner moisturizes and conditions skin because emollients have been added making it pleasant smelling and gentle to use.

Cornbelt® Hand Cleaner may be used with or without water, then wiped off with a towel or rinsed off by water. Convenient 23-ounce tubes are easy to hang on a sprayer or anywhere a hand cleaner is needed. Spring loaded caps make it easy to open the tube with one hand.




View Label | View MSDS
Soy-Stik

CORNBELT® Methylated Soy-Stik®

A blend of methylated soybean oil and surfactant emulsifier.

Functioning agents: 100.0%

Cornbelt® SOY-STIK® methylated soybean oil is a multi-component spray adjuvant designed to enhance the performance of many post-emergence herbicides by increasing the amount of herbicide that penetrates through the plant cuticle to reach the “target site” within the weed. Cornbelt® SOY-STIK® includes a defoamer and should be used when methylated crop oil is recommended on the herbicide label.

View Label | View MSDS
Metro

CORNBELT® Metro™

Concentrated - Solventless - Low Odor - Low Volatile - Superior Mixing

Contains 2-Ethylhexyl Ester of 2,4-D

For selective control of many broadleaf weeds in certain crops, including cereal grains (wheat, barley, millet, oats and rye), corn (field corn, popcorn and sweet corn), fallow land and crop stubble, potatoes, sorghum (grain and forage sorghum), and soybeans (preplant burndown application only), forests, rangeland and established grass pastures, including Conservation Reserve Program (CRP) acres, non-cropland, grasses grown for seed or sod, and ornamental turf.

ACTIVE INGREDIENT:
2,4-Dichlorophenoxyacetic acid: 87.2%
2-Ethylhexyl Ester
INERT INGREDIENTS: 12.8%
TOTAL: 100.0%

2,4-Dichlorophenoxyacetic Acid Equivalent: 57.5% - 5.5 lb/gal

View Label | View MSDS
N-tense

CORNBELT® N-Tense™

Water Conditioning Agent

Cornbelt® N-TENSE™ is a new technology water conditioner based on amide chemistry evaluated extensively by Michigan State University and designed to replace Ammonium Sulfate in tank mixes primarily with glyphosate.

Cornbelt® N-TENSE™ Development

Cornbelt® N-TENSE™ Reduces Glyphosate “Tie-Up”

Cornbelt® N-TENSE™ Improves Herbicide Performance

Cornbelt® N-TENSE™ Advantages

Cornbelt® N-TENSE™ Directions for Use



View Label | View MSDS
Premier 90

CORNBELT® Premier 90

High active ingredient non-ionic spray adjuvant designed to enhance the effectiveness of herbicides which recommend the addition of a non-ionic surfactant.

PRINCIPAL FUNCTIONING AGENTS:
Alkyl Aryl Polyalkoxylated non-ionic surfactant and free fatty acids: 90%
INERT INGREDIENTS: 10%
TOTAL: 100.0%

Cornbelt® Premier 90 is a low foaming, non-ionic spreader activator with superior rain wash-off resistant properties.

Superior composition of Cornbelt® Premier 90 incorporates the properties of a wetter/spreader surfactant when used in herbicide spray mixtures. Cornbelt® Premier 90 is designed to quickly wet and spread a more uniform spray deposit over the leaf and stem surface. After drying, Cornbelt® Premier 90 resists washoff compared to surfactants that do not contain free fatty acids.

Cornbelt® Premier 90 is low foaming because additional anti-foam agent is added. Foam slows down the loading of spray tanks and can lead to uneven mixtures in the tank.

Cornbelt® Premier 90 reduces the surface tension and contact angle of the spray droplet by 2/3’s compared to water, which increases the surface area covered by the herbicide and helps the herbicide penetrate the weed.

CORNBELT® PREMIER 90 IS THE INDUSTRY STANDARD FOR NON-IONIC SURFACTANTS TO MEASURE UP TO!




View Label | View MSDS
Premium AMS

CORNBELT® Premium AMS

INGREDIENTS:
Sprayable Ammonium Sulfate: 99.5%
Water: 0.5%
TOTAL: 100.0%

Cornbelt® PREMIUM AMS is the highest quality spray grade Ammonium Sulfate adjuvant available. The pure white crystals dissolve easily in water making a clear solution. Cornbelt® PREMIUM AMS is impurity-free and non-foaming. Cornbelt® PREMIUM AMS is an approved spray adjuvant to enhance the performance of herbicides including:

Accent Celebrity Plus Laddok S-12 Raptor
Accent Gold Clarity Liberty Readymstr ATZ
Aim EW Classic Liberty ATZ Resource
Amplify Cobra Lightning Rezult
Backdraft SL Distinct Marksman Roundup Brands
Banvel Exceed Northstar Select
Banvel k + ATZ Extreme Option Spirit
Basagran Fallow Star Peak Steadfast
Basis Field Master Permit Stellar
Basis Gold FirstRate Poast Storm
Beacon Flexstar Poast Plus Synchrony STS
Beyond Glyphomax Brds Pursuit Plus Touchdown
Buccaneer Brds Harmony GT Pursuit DG Ultra Blazer
Callisto Hornet WDG RT Master Yukon



View Label | View MSDS
Premium Crop Oil

CORNBELT® Premium Crop Oil

INGREDIENTS:
Paraffinic Mineral Oil: 80%
Non-ionic Surfactant/Emulsifier: 20%
TOTAL: 100.0%

Cornbelt® Premium Crop Oil Concentrate is manufactured using the highest refined mineral base oil available for agricultural spray formulations. The mineral base oil used in Cornbelt® Premium Crop Oil Concentrate has 70% Paraffinic hydrocarbons which is considered the highest available for agricultural sprays and contributes to maximum herbicide efficiency.

Cornbelt® Premium Crop Oil Concentrate’s base oil molecular weight is carefully controlled at the optimal medium range of C23. Research has shown that optimal molecular weight and high paraffinicity are the key criteria in defining the effectiveness of agricultural spray oil.

Mineral base oil assures crop safety with an unsulfonated residue of 95% to protect sensitive crop plant tissues from injury. The surfactant/emulsifier used in Cornbelt® Premium Crop Oil Concentrate contains no alcohol and provides excellent emulsifying and spreading qualities. Cornbelt® Premium Crop Oil Concentrate is compatible in spray tank mixtures containing AMS.

Cornbelt® Premium Crop Oil Concentrate contains 20% surfactant/emulsifier. This is almost 18% more surfactant/emulsifier than most crop oil concentrates on the market today. Added surfactant/emulsifier further enhances surface activity and herbicide penetration of the weed leaf surface. Defoamer has been added to Cornbelt® Premium Crop Oil Concentrate to minimize foam in the mix tank.




View Label | View MSDS
Pro-One XL

CORNBELT® Pro-One XL™

Nonionic surfactant, drift & deposition management, ammonium sulfate and defoamer

INGREDIENTS:
Ammonium sulfate, carbonyl diamine, polyoxyethylene-polyoxypropylene, beta-Hydroxy-tricarboxylic
acid, polyacylamide, dimethysiloxane: 99.8%
Constituents ineffective as Spray Adjuvants: 0.2%
TOTAL: 100.0%

Cornbelt® PRO-ONE XL contains a proprietary clathrate nonionic surfactant and a multifunctional drift & deposition management and water conditioning agent containing the TransGard® System technology.

Cornbelt® PRO-ONE XL™ is a milled ammonium sulfate and proprietary nonionic surfactant that contains a unique combination of polymers that provide drift management and improved deposition.

Cornbelt® PRO-ONE XL™ is designed to be used with “non-loaded” glyphosate and other herbicides that call for use of nonionic surfactant and AMS and in applications where drift, deposition and foaming are issues.

Cornbelt® PRO-ONE XL™ is formulated with a patented polymer system that improves spray penetration and performance.

Cornbelt® PRO-ONE XL™ contains silicone antifoam to minimize the formation of foam in the spray tank.

USE RATE: Spray pressure below 30 psi or when using cone or raindrop nozzles: 10 pounds per 100 gallon of spray solution. 10 pounds of Cornbelt® PRO-ONE XL™ delivers 8.5 pounds of ammonium sulfate and one quart of nonionic surfactant. Spray pressure greater than 30 psi or when using flat fan or flood nozzles: 10 to 13 pounds per 100 gallon of spray solution.




View Label | View MSDS
Salvan

CORNBELT® Salvan®

SALVAN® is specifically designed to control broadleaf weeds in cereal crops, corn, milo, lawns, meadows and pastures.

ACTIVE INGREDIENT:
2,4-Dichlorophenoxyacetic Acid: 81.8%
2-Ethylhexyl Ester
INERT INGREDIENTS: 18.2%
TOTAL: 100.0%

Cornbelt® SALVAN® controls over 50 tough to control weeds including artichoke, bindweed, burdock, canada thistle, pigweed, sunflower, lambsquarter, and many more including noxious plants susceptible to 2,4-D.

Cornbelt® SALVAN® may be used alone or as a tank mix with other herbicides listed on the label.

Cornbelt® SALVAN® provides excellent application flexibility as it may be used preemerge or postemerge for corn. Refer to the product label for application information regarding other crops.

Cornbelt® SALVAN® is an effective broad-spectrum, low volatile weed killer that controls tough weeds in an ester formulation which may be tank mixed with many other herbicides. Refer to the tank mix partner’s label for specific rate information.

Cornbelt® SALVAN® is formulated using a premium emulsifying agent which forms a high quality stable emulsion.

Caution should be exercised when applying above 95 degrees Fahrenheit, even though SALVAN® is a low volatile formulation, as vapors may damage susceptible crops growing nearby.




View Label | View MSDS
Spray Activator 85

CORNBELT® Spray Activator 85

Non-ionic spray adjuvant for use with herbicides recommending the addition of a non-ionic surfactant.

PRINCIPAL FUNCTIONING AGENTS:
Alkyl Aryl Polyalkoxylated non-ionic Surfactant blend: 85%
INERT INGREDIENTS: 15%
TOTAL: 100.0%

Cornbelt® Spray Activator 85 is a non-ionic general purpose spreader activator for use with herbicides to improve the effectiveness of the herbicide by providing a more uniform coverage without excessive run-off of the spray, increasing activity and aiding penetration.

Cornbelt® Spray Activator 85 reduces the contact angle and surface tension of a spray droplet. This increases the surface area covered by the herbicide and helps the herbicide penetrate the weed.

Cornbelt® Spray Activator 85 is a low foam adjuvant which prevents slow down of loading the spray tank and avoids uneven mixtures in the tank.

CORNBELT® SPRAY ACTIVATOR 85 IS THE WORK HORSE OF NON-IONIC SURFACTANTS.




View Label | View MSDS
Tank and Equipment Cleaner

CORNBELT® Tank Cleaner-Dry

Cornbelt® TANK AND EQUIPMENT CLEANER is available in a dry formulation in 6x3 pound cases and 12x1 pound cases and is also available in a liquid formulation in 4x1 gallon cases.

Cornbelt® TANK AND EQUIPMENT CLEANER will clean and emulsify pesticide and adjuvant residues and bond them to the rinse solution to allow for complete rinsing and system purging with ordinary water.

Cornbelt® TANK AND EQUIPMENT CLEANER contains corrosion inhibitors, is tolerant to hard water and works well on metal, fiberglass and plastic spray systems as well as being safe to most painted surfaces. Cornbelt® TANK AND EQUIPMENT CLEANER removes light rust and at the same time leaves a protective film that helps prevent corrosion.

Cornbelt® TANK AND EQUIPMENT CLEANER neutralizes acid residues of pesticides, preparing the spray tank for the use of other products. Neutralization of residue spray materials will prevent damage from occurring to non-target plants.




View Label | View MSDS
Tank and Equipment Cleaner

CORNBELT® Tank Cleaner-Liquid

Cornbelt® TANK AND EQUIPMENT CLEANER is available in a dry formulation in 6x3 pound cases and 12x1 pound cases and is also available in a liquid formulation in 4x1 gallon cases.

Cornbelt® TANK AND EQUIPMENT CLEANER will clean and emulsify pesticide and adjuvant residues and bond them to the rinse solution to allow for complete rinsing and system purging with ordinary water.

Cornbelt® TANK AND EQUIPMENT CLEANER contains corrosion inhibitors, is tolerant to hard water and works well on metal, fiberglass and plastic spray systems as well as being safe to most painted surfaces. Cornbelt® TANK AND EQUIPMENT CLEANER removes light rust and at the same time leaves a protective film that helps prevent corrosion.

Cornbelt® TANK AND EQUIPMENT CLEANER neutralizes acid residues of pesticides, preparing the spray tank for the use of other products. Neutralization of residue spray materials will prevent damage from occurring to non-target plants.




View Label | View MSDS
Trifluralin

CORNBELT® Trifluralin EC

4 pound active ingredient per gallon selective herbicide for preemergent control of annual grasses and broadleaf weeds in soybeans and certain other crops.

ACTIVE INGREDIENT:
Trifluralin (a,a,a-trifluoro-2,6-dinitro-N, N-dipropyl-p-toluidine): 43.8%
INERT INGREDIENTS: 56.2%
TOTAL: 100.0%

Cornbelt® TRIFLURALIN is a preemergent herbicide which must be incorporated into the soil to provide long lasting control of many annual grasses and broadleaf weeds.

Cornbelt® TRIFLURALIN controls weeds as they germinate before valuable nutrients are stolen from your crop.

Cornbelt® TRIFLURALIN provides excellent control on more than 30 weeds and grasses, including pigweed, lambsquarter, foxtail, seedling johnsongrass, crabgrass and many more.

Cornbelt® TRIFLURALIN gives you application options to fit your farming practices. Apply in early Spring, Fall or at planting time.

Cornbelt® TRIFLURALIN is your first step in weed control in soybeans for dependable, season-long crop protection. When used in a planned program with one of the many post herbicides even the toughest broadleaf weeds may be effectively controlled.




View Label | View MSDS
Trophy Gold

CORNBELT® Trophy Gold™

Ethoxylated Soybean Oil Surfactant

Cornbelt TROPHY GOLD is a patented new technology surfactant. TROPHY GOLD may be used any time the pesticide label calls for the use of either a nonionic surfactant or a crop oil concentrate at significantly reduced use rates.

Cornbelt TROPHY GOLD Development

Cornbelt TROPHY GOLD Technology

Cornbelt TROPHY GOLD Performance

Cornbelt TROPHY GOLD Advantages




View Label | View MSDS
Ultra-Mark

CORNBELT® Ultra-Mark™

PRINCIPAL FUNCTIONING AGENTS:
Proprietary blend of active foam agents & formulation aids: 100.0%

Cornbelt® ULTRA-MARK™ FOAM MARKER is specially formulated with a unique blend of high foaming surfactants and stabilizers that delivers longer foam life:

Cornbelt® ULTRA-MARK™ FOAM MARKER provides the applicator with one of the most long lasting and versatile foams on the market today.

USE RATE:

Whenever a foam colorant additive is used, use one gallon of Cornbelt® ULTRA-MARK™ FOAM MARKER for every 80 gallon of water.